STOVES Gas 60 cm, Installation Instructions Manual

Page: 5 / 12

5
B E F O R E I N S TA L L AT I O N
L E V E L L I N G YO U R CO O K E R
1. Place a spirit level on a baking sheet onto an oven
shelf.
2. The cooker is fitted with levelling feet (1). Level your
cooker to your desired height using the levelling
feet at the front and rear of the cooker.
1
Rear of cooker
R E A R W H E E L S ( I F F I T T E D)
Adjustment of the wheel height can be made with a
screw driver, through the hexagonal hole in the front
plinth.
P R O D U C T S W I T H C A S T L I D ( W H E R E
F I T T E D)
A 35 mm clearance is required from the back of the
hotplate to the rear wall, to allow the lid to be opened
fully. To ensure this clearance is maintained, the infill
piece (supplied) should be fitted using the instructions
below.
Fix the infill piece to the wall - using suitable screws
and wall fixings (not supplied) - and ensure it is level
with the hotplate as shown.
4
Note : The 35 mm clearance dimension
should not be reduced.
600mm
35mm