STOVES 600CTI, User Manual

Page: 23 / 32

21
Fitting into worktop
• Cut a hole in the work surface to
the required size.
A clearance of at least 40mm
should be maintained between the
cutout and any rear or side wall.
• The cooking hob should be fitted
into a worktop which is least
40mm thick. The worktop must be
of heat-resistant material or covered
with heat-resistant material.
• Protecting the cut-out;
The types of chipboard used for
work surfaces swell relatively
quickly in contact with humidity.
Apply a special varnish or adhesive
to the cut edge to protect it from
steam or condensation which may
form under the work surface under
the hob.
Minimum clearance above the
hob
300mm
Important: So that cooking utensils can
be used easily, there should be no unit
or vertical surface within 300mm of
the cooking hob.
INSTALLATION INSTRUCTIONS - 700CTI