Storz UNIDRIVE Select Instructions For Use Manual Download Page 6

Page: 6 / 64

General information

Instructions for use • UNIDRIVE Select • PCC270_EN_V1.0_02-2022_IFU_CE-MDR

– Unnumbered list, 2nd level

1.5 Description of warning messages

To prevent any injury to persons or damage to property, the warnings and safety notes in the
instructions for use must be observed. The warnings use the following levels of danger:

WARNING

Designates a possible imminent risk. If this is not avoided, it could lead to death or serious
injuries.

CAUTION

Designates a possible imminent risk. If this is not avoided, it could lead to minor injuries.

NOTICE

Designates a possibly harmful situation. If this is not avoided, the products could be damaged.

1.6 Abbreviations

Abbreviation

Explanation

Computed tomography

ENT

Ears, nose and throat medicine

MRT

Magnetic resonance tomograph

NEURO

Neurosurgery

RFID

Radio frequency identification

SPINE

Vertebral column

OMFS

Oral and maxillofacial surgery

CNS

Central nervous system

Summary of Contents for UNIDRIVE Select

































































Search results

Summary of Contents for UNIDRIVE Select

Reviews:

Related manuals for UNIDRIVE Select

Brands by name

Popular brands

Storz UNIDRIVE Select, Instructions For Use Manual

Search results

Summary of Contents for UNIDRIVE Select

Reviews:

Related manuals for UNIDRIVE Select

Brands by name

Popular brands