Preparation
Instructions for use • UNIDRIVE Select • PCC270_EN_V1.0_02-2022_IFU_CE-MDR
21
5 Preparation
5.1 Unpacking the product
1.
Carefully remove the product and accessories from the packaging.
2.
Check the delivery for missing items and any possible damage.
3.
In the case of damage, hidden defects, and short deliveries, document their nature and
extent and contact the manufacturer or supplier immediately.
4.
Keep packaging for further transport.
5.2 Setting up the product
WARNING
Overheating! Risk of fire!
Insufficient ventilation can cause an internal build-up of heat, resulting in a safety shut-down. If
the product overheats, there is a risk of fire. Patients, users, and third parties may be injured.
Ensure that there is sufficient air circulation.
Keep air inlets and outlets free.
CAUTION
Breakable glass! Risk of injury!
The glass of the screen will break if the product is dropped or sustains a significant impact.
Patients, users or third parties can injure themselves on broken glass.
Do not touch broken glass.
Do not touch the glass parts of the product.
Remove small glass parts from the product.
Have the glass replaced by qualified service personnel.
This product and connected components may only be used in medical rooms with electrical
installations that conform to applicable national regulations.
1.
Set the product down on a horizontal, flat surface or a video cart.
2.
Install the product out of reach of patients.
5.3 Connecting the product
1.
Connect the potential equipotential cable.
