P.4
Installing the Programming Software
Programming the Transmitter
2.4Ghz 6 Channel Transmitter and Receiver
Programming software and USB cable driver and be found on the CD included.
Install the USB cable driver once windows has detected the USB cable.
Open the programming software : t6config.EXE
Restart computer.
1.
2.
3.
4.
You can are use Windows XP or Windows Vista to setup.
!
Before you can program the transmitter, you need to install the USB driver first.
Please follow the following steps :
Turn on transmitter, please make sure 8 X AA Batteries were installed.
Connect USB cable to Transmitter.
Open t6config.EXE , this icon should be located on desktop.
1.
2.
3.
With the provided USB cable and software installed, Storm ST-06TX Transmitter can be
programmed by computer using Windows XP.
