GIZMO/GIZMO XF INSTRUCTIONS
1. Lay the brace on the back of your hand. Adjust the wrist/forearm strap so that it is secure on
your forearm, but still comfortable enough to allow circulation to your wrist and hand. Also,
lightly tighten the palm strap to keep your hand in place before adjusting the wrist cup and angle.
2. Loosen the silver knob or dial on the back of the glove by rotating it counterclockwise. With
the dial loose, move your wrist back and forth (left and right) until it feels comfortable. After you
find this position, the proper wrist angle, tighten the knob to secure in place. Just remember to
not over-tighten the dial when locking it in place!
3. Once you have the left/right angle comfortable, now we need to determine the proper wrist
cup. Move your palm towards your wrist and, with your opposite hand, press the spring-loaded
gate to the right to release the bar to the fully extended position. The result is a maximum cupped
position. To reduce the amount of cup, simultaneously press the back of your hand into the glove
while pressing the silver gate to the right. This will allow the bar to retreat into the housing
located directly above the silver metal dial or knob..
4. At this point, you should release the palm strap, move your wrist in a circular motion a few
times, and then secure the palm strap to keep your hand in place. Just like the forearm strap, this
should be tightened enough to keep your hand in position, but not enough to stop circulation to
your palm and fingers.
5. It’s time to bowl… Roll a few shots and see how it works and feels… adjust the wrist angle
position and wrist cup adjustment bar until you find a comfortable zone that feels good and helps
your game… Remember too that the different position will also change your ball roll, so you
may be able to customize it to your particular lane conditions as needed.
