OPERATING INSTRUCTION:
a) Make sure of Air Supply
b) Switch light on
c) Choose the correct Abrasives for intended application. Pour
grit in to cabinet through the sieve
d) Close the door
e) Switch on Dust Extractor
f) Insert hand into rubber gloves and hold the blasting gun.
g) Stand on foot pedal for blasting operation. To stop blasting
process, remove foot from pedal.
h) As much as possible, Blast at an angle of 90 degrees and at
a distance of 50 – 100mm
DAILY MAINTENANCE
a) Drain Water out of Filter / Water Trap as often as possible
b) Clean dust out of Dust Cartridge using vibrator. (preferably
also during the course of the day i.e. lunch time)
c) Remove dust tray with dust, empty the tray by either
returning the grit to the cabinet or discarding it. Replace the
dust tray.
MONTHLY MAINTENANCE
a) Check the extractor cartridges for damage (by running the
vibrator for an extended period) and replace cartridges if
necessary.
b) Rotate the air jet through 90 degrees, to ensure even
wearing of the jet.
c) Check the rubber seals on the doors to ensure dust
containment within the cabinet during operation.
