manualshive.com logo in svg

Storm Interface Nav-Pad, Technical Manual

Share
Download
Storm Interface Nav-Pad Technical Manual Download Page 10

 

 

NavPad

™

  

 

Technical Manual     

 

 

The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information  
is confidential and is not to be used for any purpose, or disclosed to a third party without the express and written consent of 
Keymat Technology Ltd., Copyright 2020.    All rights reserved.  

 
NavPad - Technical Manual Rev 2.2                        

www.storm-interface.com

         

 

           Page 10 of 64 

 

Using the NavPad 

TM

 Windows Utility to change USB Codes 

Note that there are 2 Windows Utility packages available for download:  

  Standard NavPad   

  Illuminated NavPad  

 

 

Please ensure you use the correct one as shown below 

If any other keypad utility software is installed (e.g EZ-Key Utility) then you should un-install that before you start.  

Non illuminated NavPad utility 

To be used with the following part numbers: 

 

EZ08-22301 

 

EZ08-22200 

 

EZ06-23001 

 

EZ08-23001 

 

EZ08-23200 

Illuminated NavPad utility 

To be used for the following part numbers: 

 

EZ06-43001 

 

EZ08-43001 

 

EZ08-43200 

 

System Requirements 

The utility requires .NET framework to be installed on the PC and will communicate over the same USB connection 

but via the HID-HID data pipe channel, no special drivers are required. 

 

Compatability

 

Windows 10 

 

 

Windows 8 

 

 

Windows 7  

 

 

Windows Vista   

 

Windows XP    

Only if you install .NET framework 

Windows ME and earlier 

 

Not investigated 

 

The utility can be used to configure the product for: 

 

• 

LED On/Off  

• 

LED brightness (0 to 9)  

• 

Buzzer On/Off  

• 

Buzzer Duration (¼ to 2 ¼ seconds) 

• 

Load customised keypad table 

• 

Write default values from volatile memory to flash 

• 

Reset to factory default 

• 

Load Firmware 

 

Note that 

non-audio versions

 also support multiple key press combinations

. 

 

Summary of Contents for Nav-Pad

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands