Störk-Tronic TRT252-31.34, Wiring Diagram, Page: 9 / 22

Parameters for alarm- and error conditions
Para-
meter Function Adjustment range Standard
setting Customer
setting
A0
Hysteresis for alarm contact 1...15 K
2 K
A1 Minimum limit value -55...0 K
0= inactive -10 K
A2 Maximum limit value 0...+99 K
0= inactive 10 K
A3 Alarm suppression time after
“cooling on” 0...15 Std. 2 h
A4
Effect of external alarm input N/A
A5
Alarm suppression time after
temperature alarm 0...60 min. 10 min.
A6 Alarm limits 0: relative to the setpoint
1: absolute 0
A7 Alarm suppression time after
night time reduction 0...60 min. 10 min.
Parameters for the ventilator
Para-
meter Function Adjustment range Standard
setting Customer
setting
F0 Ventilator control 0: dependent on temperature
1: continuous on 0
F1 Ventilator setpoint -99...+99°C -1°C
F2
Switching hysteresis
ventilator 2...15 K 2 K
F3 Behaviour at compressor
stop 0: ventilator independent of
compressor
1: ventilator off together with
compressor
1
F4 Behaviour at defrosting 0: ventilator independent of
defrosting
1: ventilator off together with
defrosting
2: ventilator on together with
defrosting
1
F5 Ventilator delay time after
defrosting 0...15 min.
2 min.
F6 Ventilator control 0: absolute control
1: dynamic control 0
F7
Ventilator revolution number
at normal cooling operation 0...100%
100%
F8 Ventilator revolution number
during night time reduction 0...100%
100%
F9 Ventilator revolution number
at defrosting 0...100%
100%