XSR
Xtreme Storage Rack
- Phillips Screw Driver
- Tape Measure or Ruler
- Pencil
- Stud Finder or Nail and Hammer
- Rubber Mallet of Hammer
- Level (optional)
2 - Slotted Tracks
8 - Rack Arms
8 - Mounting Screws
WHAT YOU NEED
WHAT’S INCLUDED
THANK YOU FOR YOUR PURCHASE!
Please read all instructions before installing this product
It is the user’s responsibility to ensure the safe and proper use of this product. StoreYourBoard, a Spire LLC company, is
not responsible for damages or injuries related to installation or use, including improper or inadequate mounting. Wear eye
protection during installation and check for electrical wiring in the wall before screwing or drilling into the wall.
Not a toy;
not intended for children. Misuse of this product could result in serious injury or death.
SAFETY INSTRUCTIONS & PRODUCT WARNINGS
- Page 1 -
SPACING
The XSR consists of 2 Tracks that can be mounted at any desired distance to fit the
length of your boards and gear. You must mount the XSR to the wall studs or another
solid surface. Typical studs in a home are spaced 16 inches apart. The most typical
mounting distances apart for the 2 Tracks are 32” and 48”. Measure your boards and
gear, find the shortest required distance, and confirm the XSR will support it.
You can also adjust the vertical spacing of the Rack Arms after they’ve been mounted
into the Tracks.
