6
Control elements
1
Fastening screw
for blade holder
2 Blade holder
3 Blade
4 Adjusting screws
on the stop bar for
adjusting the trim
thickness
5 Angled stop
6 Straight stop
The chamfering tool is used for planing, fitting and angling
edges on design trims.
Move the loosened blade holder (2)
back and forth to set the desired bla-
de cutting depth (3).
The trim thickness is set using adjust-
ment screws (4) on the stop bar.
Use the straight stop for planing and
fitting the cut edges, and the angled
stop for chamfering (fig. on right).
Any user using the tool is personally responsible for ensuring operating safety
and intended use of the tool!
GB
