94
Original instruction
Volume measurement
Press the
button 2x. The
1
1
2
2
3
3
(area) symbol is
shown in the display.
Press the
button to measure the first distance
(e.g., length)
Press the
button to measure the second distance
(e.g., width)
Press the
button to measure the third distance
(e.g., height)
The result is automatically determined and shown in an
m
3
format.
Indirect measurement (Pythagoras)
- Determining a distance with two measurements
Indirect measuring is used to measure distances that can-
not be measured directly because an obstacle would block
the laser beam, or there is no suitable target surface as a
reflector.
Indirect measurement for determining a distance with two
auxiliary measurements.
Press the
button until the
symbol appears
in the display. The distance to measure first is shown as a
flashing line in the symbol.
Summary of Contents for 26 68 45
