97
4.2.2 Hot water operation (up to 100° C)
IMPORTANT!
In the case of appliances with a hose reel: In hot water
mode, unwind the high-pressure hose fully from the hose
reel, as otherwise the hose reel may become warped due
to the effects of the heat.
1.
Move main switch into the position ‚Hot Water‘ (B) and
select the required temperature on the temperature con-
trol.
AVERTISSEMENT!
Set a maximum temperature of 80° C when operating the
high-pressure cleaner in combination with the STORCH
Power High-Pressure Krake!
2.
Unlock the spray gun and actuate it.
The burner switches on.
In case of interruptions in work: Also be sure to insert the
safety catch even during short interruptions in work (see
Fig. in section 6.1)
4.4 Using cleaning agents
WARNING!
Never allow cleaning agent to dry on the surface to be
cleaned. The surface may be damaged.
For special applications (e.g. disinfection) the exact deter-
gent concentration has to be determined by measuring
cup. For water throughput of the machine see chapter
Technical data.
1.
Set the desired concentration of cleansing agent at the
cleansing agent dosing facility.
2.
Spray the object to be cleaned.
3.
Allow the cleaning agent to work, depending on the
degree of soiling. Then rinse off with the high pressure
spray jet.
Original instruction
Summary of Contents for 140 HOT
Page 134: ...134 ...
Page 135: ...135 ...
