Storch Kamine SIC 700 S, User Manual

Page: 23 / 31

23
Gültig seit/Valid from/Valide: 09.10.2019
Select furnace
Select the type of furnace

Settings 1
– ASKJA EX / ASKJA SE / ASKJA H EX / ASKJA H SE / ASKJA BF EX /
VULSINI EX / VULSINI SE / VULSINI H EX / VULSINI H SE

Settings 2
– ECUADOR EX / ECUADOR SE / ECUADOR H EX / ECUADOR H SE /
MAGNA SE / VUELTA SE / VUELTA F SE / VUELTA H SE / SINEOS SE /
SINEOS F SE / SINEOS H SE

Settings 3
– CUADRADO SE
Test
This is used to test the functionality of the regulator. The servomotor, relay, acoustic signals and
LEDs on the front panel can be tested.
Start the test by pressing the selected component.
After pressing BACK wait 8 seconds to restore application.
Regulator temperature
This specifies the currently set regulator temperature.
Times stoked
This specifies the number of times stoking has occurred.
Note: this value can only be reset by resetting the device to its default, factory settings.
Times overheated
Displays how often the furnace has overheated.
Note: this value can only be reset by resetting the device to its default, factory settings.
Factory settings
This will return the machine to its factory settings. All your entered data will be deleted.
4 INDICATIONS AND NOTIFICATIONS
4.1 Mobile app indications and notifications
4.1.1 Mobile app indicators
The app will inform the user about current status throughout the combustion stage. The app displays
4 colours representing the current temperature in the furnace.
Aim to achieve a red colour, which indicates the furnace’s optimal temperature and amount of
stoked fuel.
The app also displays the flue gas temperature, position of the Air flap, combustion time and other
settings as described in the previous sections.
4.1.2 Mobile app notifications – text notifications
The app will send you notifications of important moments: