The storage system should only be installed in a clean, dry environment. The operating temperature is 5º
to 35º C (41º to 95º F), with operating relative humidity at 20 to 80%, non-condensing.
The cordset specification for the Nexsan E60X and Nexsan E48X in North America is USA IEC C13 to
IEC C14, rated 250V/10A. When applying power to the storage system, use ONLY the IEC power cords
originally supplied with it. Do NOT use other power cords, even if they appear identical to the supplied
cords.
Only a fully-trained Service Engineer is authorized to disassemble any other part of the storage system,
and then only when the storage system is powered off.
All Nexsan E-Series Storage Systems have multiple power connections; as a result, you must remove all
power leads to completely remove power from the storage system.
Revision history
This section lists updates and new material added to the
Nexsan E-SeriesFRU Removal and Replacement
Guide for the Nexsan E60X and Nexsan E48X Storage Systems.
P450135 Rev: B, March 2022
Updated for technical accuracy, applied new Nexsan template and branding.
P0450141, Rev A, August 2016
Changed document number to part number
Added Information for E60P and E48P
NXS-EX4U-MG Rev. 03, October 2014
Added section
on page 12 to the beginning of Chapter 2; updated all
ESD warnings; added ESD warnings to all sections that deal with handling electronic components or disk
drives, each one referencing
NXS-EX4U-MG Rev. 02, July 2014
Fixed minor errors throughout.
NXS-EX4U-MG Rev. 01, February 2014
Changed formatting throughout to reflect Nexsan as an Nexsan brand; separated installation content from
FRU replacement content into two documents; changed name of document to
Nexsan E-Series FRU
Removal and Replacement Guide for the Nexsan E60X and Nexsan E48X RAID Storage Expansion Units.
About this manual
Nexsan E48X and Nexsan E60X
FRU Removal and Replacement Guide
Nexsan
vii
