Ultra320 DE200 User's Guide - Rev. A01
StorCase Technology, Inc.
Installation
13
WARNING:
Unlocking the carrier unit switches DC power off to the drive.
Since disk drives require a short amount of time to spin down,
allow about 15 seconds before pulling the carrier unit out of the
receiving frame to avoid possible damage to the drive.
3.
Use the alignment tool supplied with the DE200 to select the unit ID number of the disk
drive. Refer to Figure 9 for the location of the Unit ID select switch inside the receiving
frame.
4.
After selecting an appropriate unit ID number, replace the DE200 carrier in the receiving
frame, and LOCK IT IN PLACE.
NOTE:
The lock on the DE200 receiving frame serves two functions: 1) as a
lock to secure the drive, and 2) as a DC power switch for the carrier
unit. The lock must be engaged (turned counterclockwise) in order to
supply power to the drive carrier.
5.
The new drive may need to be formatted or initialized prior to use with the operating
system and applications software. Refer to the drive and/or computer manufacturer's
documentation for formatting information.
Figure 9: Unit ID Select Switch Location
ID Select
Rotating Switch
0179i
Unit ID Number
Display
