9
STORAGE SHELF ASSEMBLY
STEP 1
Begin the bottom of frame assembly by joining a short double rivet beam (item 3) into
the two bottom keyholes of a corner post (item 1). Be sure that the flange is facing up,
then drive the rivets to the bottom of the key hole by hitting the beam with a rubber mal-
let. Repeat to add the second corner post, creating a bottom end section.
Tip:
Hit the beam with a rubber mallet, close to the joints, locking the pieces together.
STEP 2
Assemble a long double rivet beam (item 2) to the bottom key holes of the bottom end
assembly (refer to detail). Hit the beam near the joints with a rubber mallet, to lock
pieces together. Add the corner post and a short double rivet beam. Be sure that all
beam flanges are facing up. Follow instructions 1 through 5 as shown in the drawing, to
complete the assembly.
Note:
Hit the beams near the joints, with a rubber mallet, to lock the pieces into place.
