6
STEP 2
Assemble a long double rivet beam (item 2) to the bottom key holes of the bottom end
section (refer to detail). Hit the beam near the joints with a rubber mallet, to lock pieces
together. Add the corner post and a short double rivet beam (item 3). All beam flanges
must be facing up. Follow the order 1 through 5 shown in the drawing to complete the
assembly.
Note:
Hit the beams near the joints with a rubber mallet to lock the pieces into place.
STEP 3
Add the short and long double rivet beams to the top two key holes of each corner post
(refer to detail). Be sure all flanges are facing up. Hit the beam near the joints with a
rubber mallet, to lock pieces together.
