Figure 4
3.
After finishing installing the first two groups of peak arches, connect the Connection Tube (part
code 5) and Supporting tube for roof frame (Part No 6) onto them by using Bolt M10x80mm
（
part code 14
）
. Then install the third group into base plate and connect the connection tubes,
there are 5 groups of peak arches and 5 pieces of connection tubes between each two groups. Finally
install the Diagonal Bracing Tube (part code 19) using Clip
（
part code 19A
）
as Figure No
2. By turns the assembly of the main frame is finished.
C--END DOORS ATTACHED
Figure 5
Door frame: Connect all the tube for door frame and fix them by using right bolts.
Put on the front and back covers (Part No. 12) refer to the Figure 5 and knit the cover by using
rope (No.16).
D- Install the Roof Cover
