NOTE: DO NOT install the cover onto the frame of your building in high wind conditions. A
slight breeze is the most advantageous for cover installation. To take advantage of the breeze,
pull the cover up over the arches with the breeze blowing in the cover like a sail filled with air.
1.
Put the Roof cover (part code 8) EVENLY, CARRFULLR AND SLOWLY on the frame. Adjust the cover
so that it is square and evenly centered on the frame.
2.
Using Ropes (part code 11) to knit the cover on the two side arches, finally tie the Roof cover to the Angle
