6
2.
Insert one end of the assembled arch into one base plate and force the other end
of the arch into the opposite base plate.
Figure 4
3.
After installing the first two arches, connect the
Purlin
(part code 4) onto them
using the
Bolts M10x80
(part code 12). There are 7 pieces of
Purlins
(part code 4)
between each arch.
4.
Install the Inclined
Top tension device
(part code 5) using the
Clips
(part code 6).
Figure 5
5.
Then install the third arch into the base plate and connect the purlins.
6.
Assemble the arches one by one until the frame is finished.
