8
3.
Cut pockets over each ratchet on the base plates and put the
Tensioning Tube for
roof cover
(part code 16) into the pocket of
Roof cover
. Then use the
Nylon band
(part code 11) to tie down the Lower tensioning tubes as shown in
Figure 6
.
Figure 7
4.
Weld the
Angle seats
(part code 12) on each container and use
Rope
(part code 14)
to knit the cover on the two side arches and tie the
Roof cover
to the
Angle seats
.
Figure 8
