Configuring the Appliance
25
To set the rest of the OS settings
1.
Enter the name of the SSL VPN engine.
2.
Highlight the entry field for
Web Console and SSL-VPN Admin
Password
and press Enter to change the password that the user
admin
uses to access the SSL VPN Web Console and the SSL VPN
Administrator.
•
By default, the password is
Pass1234
. We strongly advise you to
change the password either in this dialog or after logging in to the
SSL VPN Web Console for the first time.
3.
Enter the
Web Console IP Address
and the
Web Console IP
Netmask
. The default IP address of the SSL VPN Web Console is
192.168.100.1.
4.
(Optional)
Enter the
Web Console IP Default Gateway
IP address
through which outgoing traffic is routed.
5.
(
Optional
) Highlight
Enable SSH
Daemon
and press the spacebar
to allow remote access to the engine command line using SSH.
Note –
Changing the password for the admin user in the Engine
Configuration Wizard sets the same password for both the SSL VPN
Web Console and the SSL VPN Administrator.
Note –
It is not necessary to enable the SSH daemon now for ongoing
management. You can also set this option through the SSL VPN Web
Console. We recommend that you enable the SSH access only when
needed and then disable the access again when you are done.
1
5
4
3
2
