18
Initial Configuration
Using the Engine Configuration Wizard
You can use the engine configuration wizard with all Management Center
and Firewall versions. If you have saved the initial configuration on a
USB stick, you can import it in the configuration wizard to reduce typing.
To start the configuration wizard
1.
Connect appliance to a computer using the serial cable supplied
with the appliance.
2.
On the computer, open a terminal with settings 9600bps, 8
databits, 1 stopbit, no parity.
3.
Turn on the appliance using the power on/off switch. The engine
bootup process is shown in the console and, after some time, the
engine configuration wizard starts.
To select the configuration method
1.
Do one of the following:
•
To import a saved configuration, highlight
Import
using the arrow
keys and press E
NTER
.
•
To skip the import, highlight
Next
and press E
NTER
.
2.
If you selected the Import option, select the configuration file.
To set the keyboard layout
1.
Highlight the entry field for
Keyboard Layout
using the arrow keys
and press E
NTER
. The Select Keyboard Layout dialog opens.
Note –
You can (re)start the engine configuration wizard at any time
using the
sg-reconfigure
command on the engine command line.
1