3
CONTENTS
Loudspeaker Description
The Ribbon Speaker Performance………………………………………………………………….4
Ribbon Speaker Kit Design Concept………………………………………………………………..5
Tweeter: Fountek Ribbon……………………………………………………………………………5
Woofer: Peerless Bass/Midrange……………...........................................................................5
The Ribbon Speaker Enclosures…………………………………………………..........................6
Centre Speaker………………………………………………………………………………………..6
Enclosure Bracing Rib………………………………………………………………………………...6
Enclosure Felt Damping………………………………………………………………………………6
Enclosure Rear Port & Port Flare ……………………………………………………………………7
Enclosure Bracing and Felt Acoustic Damping…………………………………………………….7
Grill Panel………………………………………………………………………………………………7
Enclosure Features Summary………………………………………………………………………..7
Crossover 260 260C 360……………………………………………………………………………..8
Crossover Features Summary……………………………………………………………………….8
Speaker Cable type internal wiring & amplifier……………………………………………………..8
Loudspeaker Connection
Speaker Cable Wiring (Standard) ……………………………………………………………………9
Speaker Cable (BI Wiring)…………………………………………………....................................10
Building Instructions
Crossover Board (Bottom) 260-260C 360…………………………………………………………..11
Woofer (Bottom) 260 260C 360……………………………………………………………………...11
Fountek Jp3.0 Ribbon Tweeter………………………………………………………………………11
Ribbon 260 360 Fronts………………………………………………………………………………..11
Woofer (top) 260 260C………………………………………………………………………………11
Ribbon 260C Centre Speaker………………………………………………………………………..11
Location of Crossover PCB and Wiring 260 360 260C…………………………………………...12
Testing the Finished Speaker Box
…………………………………………………………..13
Bass Speaker phase test (dc only)………………………………………………………………….13
Crossover Network Resistance (dc only) (optional)……………………………………………….13
Digital Multi Meter (DMM) Readings………………………………………………………………...13
Testing the Speaker Box Photos 2 &3 ……………………………………………………………...14
Installation Photographs
…….………………………………………………………15.to.27
Fully Assembled 260 260C……………………………………………………………………………28
Fully Assembled 360…………………………………………………………………………………..29
Recommended Loudspeaker Room Location.................................
30
How to make Port and Port Flare &
Enclosure Felt Damping
………..
31 to 38
Summary of Contents for Ribbon 260
