StoneFly USO-HA Setup Guide
Initial Installation
© 2020 StoneFly, Inc. | All Rights Reserved.
P a g e
| 22
2.2
Safety Reminders
If you must relocate the enclosure after installation
Cease all input / output transactions, shut down the system, disconnect all the cables
(please refer to the User Manual for details).
Empty all drive bays (hard hard drive trays) and transport them separately in safe
packaging.
Modules came installed within the enclosure need not be removed.
Follow the instructions provided in the StoneFly Getting Started Guide.
When the system is in operation
1
Module and drive bays must not be empty! They must have a dummy cover / plate in place
to stabilized internal airflow!
2
Should a module fail, leave it in its place until you have the replacement item on-hand to
take its place.
3
Allow at least 18~20cm of clearance space at the rear of the enclosure for ventilation.
4
Avoid touching the PCB and gold-finger connections.
