V8.0.3x
©StoneFly Inc. 2019 | All rights reserved
Page 32
StoneFly DR365V-2404 Getting Started Guide
Initial Installation
configuration is presented. Changing the default settings requires a reboot of the Storage
Concentrator. Navigate to the
System > Admin > General
screen and click on
Reboot
.
If no changes are desired continue to the next step to configure the Management Port.
18. Click on
Management Port
. The Management Port Settings screen will appear.
SCVM Management Port Settings Screen
19.
Enter the
Default Gateway
setting.
20. Enter the
IP Address
for the Management port.
21. Enter the
NetMask
setting for the Management port. It is not necessary to select a
Management Port as on the Local iSCSI Port screen. There is only one port assigned for
this purpose.
The
DR365V
automatically configures the Network and Broadcast settings based on the IP
address and Netmask settings. Click on the
Advanced: Network/Broadcast
link to view or
modify the Network and Broadcast settings. For more information refer to “Chapter 2:
Administrative Interface” in the Storage Concentrator
User’s Guide.
Changing the IP address of the Management port will cause your browser to
lose its connection to the
DR365V
. To access the
DR365V
, set your browser’s URL
to point to the new IP address.
22. Click
Submit
. The following popups will appear.
