StoneFly DR365-1204 Getting Started Guide
Initial Installation
V8.0.3x
© StoneFly Inc. 2019 | All rights reserved
Page 49
Setting up Routing
To access a host on other networks, routing information to those networks must be
configured in the System Management Network Routing screen. A route must be added if
the host has a network setting that is different from the one listed in the iSCSI Host LAN
Port Settings screen.
For example, if the
DR365
network setting is 26.34.128.50 and the host network setting is
106.39.212.6, a route to the host must be configured.
To configure the routing information, use the steps that follow:
1. Navigate to
System > Network > Routing
. The Routing screen will appear.
DR365 System Management Network Routing Screen
2.
In the
Add New Route
fields, enter the
Network
,
Netmask
, and
Gateway
settings for
the new route.
3. Click the
Add
check box.
4. Click
Submit
.
5. Navigate to
Admin > General
. The System Admin screen will appear. The
DR365
must
be rebooted for the new routing settings to be recognized.
6. Click
Reboot
.
