background image

- 10 -

HEALTH & SAFETY

Safety Precautions

HOT SURFACES

• Avoid contact with hot exhaust systems and engines.

• Allow all components in the engine compartment to cool before

performing any service work.

USE COMMON SENSE WHEN HANDLING FUELS

• Transport and handle fuel only when contained in approved safety

container.

• Do not smoke when refueling or during any other fuel handling

operation.

• Do not refuel while the engine is running or while it is still hot.

• If fuel is spilled during refueling, wipe it off of the engine

immediately and discard the rag in a safe place.

• Do not operate the equipment if fuel or oil leaks exist - repair

immediately.

• Never operate this equipment in an explosive atmosphere.

•

Always use the proper size grounded extension cord, conforming to

the National Electric Code and Local Ordinances.

•

Inspect all extensions and electrical cords for cuts, frayed wire and

broken connectors before use.  Do not use cords if not in good

condition.

•

Do not route extension cords through standing water.

•

Do not operate the mixer in standing water.

•

When cleaning the mixer, never spray water on the electric motor.

• Never leave mixer unattended while running.

• Mix only concrete.

WARNING

Summary of Contents for 65CMED





















Reviews: