2
Table 1. Combo Components
Item Description
Dimensions
1
Base Plate/Top Plate
33 x 46
2
Sidewall
11 x 33
3
Back Plate
22.5 x 40
4L/4R Slanted Sidewall
11 x 26
5
Back Header
11 x 46
6
Slanted Sidewall
11 x 26
6
Lintel, Arched
11 x 46
7
Oven Base Plate
33 x 36
8
Oven Base Plate Extension
9.5 x 36
9
Oven Roof
33 x 36
10
Oven Rear Wall Panel
N/A
11
Oven Front Wall Panel
N/A
12
Enclosure Wall Panel
18 x 33
13
Enclosure End Panel
34 x 12
14
Chimney Flue
9.5 x 9.5
15
Enclosure Roof Panel
33 x 24
Note 1
: Item numbers refer to component numbers in Figure
2.
Note 2
: Additional oven flue sections are available for pur-
chase. Flue sections must be purchased separately.
2.1 Specifications
This fireplace and oven combo is designed for outdoor
use only, and has not been tested for minimum clearanc-
es to combustibles. Consult local building codes for a
scratch-built wood fired oven, to determine minimum
clearance to combustibles. If this unit is to be installed
under a covered patio or area, the oven chimney should
be converted to use a UL-103 metal chimney system. It
is the responsibility of the installer to determine the
proper chimney system for this field conversion.
Note 1:
This Fireplace is intended for use with vent free
gas logs only. The oven appliance is intended for use with
wood only.
Note 2:
This fireplace has not been tested for use with glass
doors.
Note 3:
Do not use a fireplace insert or other products not
specified for use with this model
Note 4:
Clay flue liners installed in flue section meet the
specifications of ASTM Section C315-02.
Note 5:
Ensure installation complies with local building
codes.
Note 6:
Floor under unit must be non-combustible to earth.
2.2 Installation of Additional Equipment
WARNING: THIS FIREPLACE HAS NOT
BEEN TESTED FOR USE WITH
DOORS. TO REDUCE THE RISK
OF FIRE OR INJURY, DO NOT
INSTALL GLASS DOORS.
A. Do not install a fireplace insert in this fireplace.
B. Cutting or drilling a hole into the floor or walls
for gas supply for a vent free gas appliance (log) is
acceptable.
C. If a gas appliance is installed, it must be installed
in accordance with the National Gas Fire Code,
ANSI Z223.1.
D. It must incorporate an automatic shutoff device.
E. Installation of vent free gas logs sets must comply
with the Standard for Unvented Room Heaters, ANSI
Z21.11.2.
1
2
4R
2
2
3
2
1
5
9
4L
6
7
1
8
10
1
10
11
14
Figure 2. Fireplace Components
13
13
13
13
13
12
12
15
15
