background image

 

8

Exhibit “C” 

 
 
 

Limited Warranty 

 

The products of Stone Age Manufacturing, Inc. (Stone Age) have been carefully 
manufactured and the components assembled to give the customer a quality 
product. Stone Age warrants to the original purchaser the materials that it 
provides to the customer against defects in manufacture for a period of (1) year 
from the date of purchase. This Warranty covers only actual manufacturing 
defects in the Stone Age product, and does not cover defects or faulty 
workmanship in the installation of the product or the masonry or other structure in 
which it is installed. Stone Age shall repair or replace, at its option, any defective 
Stone Age product upon receipt of written notice addressed to Stone Age at 3320 
E. 195

th

, Bixby, Oklahoma, 74008. This limited Warranty covers only actual 

defects within the product itself, and does not cover the cost of installation or 
removal from a fixed installation. NO OTHER WARRANTIES, EXPRESS OR 
IMPLIED, ARE MADE INCLUDING IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSES 
WHICH ARE SPECIFICALLY DISCLAIMED. Stone Age is not liable for 
damages or injury to persons or property or other incidental or consequential 
damages. 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
Stone Age Fireplace Instructions 
 

 

October 2005 

 

 

Printed in USA

 

©

 Copyright 2005 

All Rights Reserved 

 Stone Age Manufacturing, Inc. 

 

 
 
 

Summary of Contents for SA 24









Reviews: