2
The 3 Foot Switches
On/Off Switch -
The foot-switch labeled ON/OFF on the left side of the control surface turns the
LED Lighting Array on/off.
Color Selection Switch
- With the exception of the Color Wheel Mode you can cycle through the
available colors using the Color foot-switch.
Mode Selection Switch
- StompLight® has 5 Modes to choose from. Each time you step on the
MODE foot-switch your StompLight® will advance to the next Mode in a predictable cycle. You will
see the small LEDs on the control surface cycle through different locations associated with each
selected Mode.
The 2 Adjustment Knobs
Brightness Adjustment Knob
- Brightness is adjusted using the Brightness Knob located on the
left side of the control surface.
Sensitivity/Rate Adjustment Knob
- This knob, located on the right side of the control surface
plays a dual role. In the Color Wheel Mode and the Stroboscopic Mode you can adjust the rate of
change (speed up/slow down) for these two modes. When the Internal Microphone Mode and the
Instrument/Mixer Input Mode are selected this knob adjusts the audio sensitivity/input.
The 5 Mode Cycle and Mode Descriptions
aka order of effects
1.Color Wheel Mode --> 2.Solid Color Mode --> 3.Internal Microphone Mode --> 4.Instrument/Mixer
Mono Input Mode --> 5.Stroboscopic Mode --> cycle back to 1.Color Wheel Mode
The Color Wheel Mode
- In this mode StompLight® will cycle through a full spectrum of colors at a
rate you choose. This is the set it and forget it mode. Stage your Stomplight and uplight your
performance area using this mode and StompLight will move through colors creating dynamic stage
lighting. Note that the Status LED on the control surface glows different colors while in this mode.
You can adjust the rate that the colors change using the Sensitivity/Rate Knob and the brightness of
light with the Brightness Knob. In the other 5 modes you can select a specific color(s) using the color
foot-switch. Color Wheel Mode is the exception as it cycles through colors independently. This is
why, while in Color Wheel Mode the Color foot-switch is non-functional. When you tap the mode
switch in Color Wheels the color displayed in the Color Wheel now migrates / becomes the first color
in the Solid Color Mode. This color is called the User Selected Color.
