Stoelting E131I, Owner'S Manual, Page: 23 / 37

15
I. Install the front door on the freezer.
J. Install the circular knobs on the freezer studs.
Figure 23. Exploded View of Front Door
Figure 24. Install Mix Inlet Regulators
G. Install the auger support and bearing into the front of
the augers with one leg of the support at 9 o’clock.
NOTE
Apply a small amount of Petro-Gel to the
surface of the cam on the spigot handle prior to
assembly of handle to the spigot body.
H. Install the spigot bodies with O-rings into the front
door from the bottom (Fig.23). Push straight up until
the spigots are in place. Install rosette caps.
CAUTION
Overtightening or uneven tensioning of circular
knobs may cause damage to front door and cause
leaking. Hand tighten circular knobs evenly.
Look for the proper seal between the freezer barrel, O-
ring, and front door.
K. Install the mix air regulator into the freezer with the
air tube to the front of the freezer. (Fig. 24).
NOTE
Refer to Section 3.3, for sanitizing the as-
sembled freezer before filling with mix.