Stoelting E131I, Owner'S Manual, Page: 21 / 37

13
Figure 18. Removing Front Door
C. Remove the rosette caps from the front door. Push
the spigot body through the bottom of the front door
and remove. (Fig. 19).
Figure 19. Front Door Disassembly
D. Remove the front auger supports and bushings
(Fig. 20).
Figure 20. Removing Auger Supports
CAUTION
Do not use any type of sharp object to remove O-
rings. Using tools to remove O-rings may damage
spigot and O-rings.
G. Remove the auger assemblies from the freezer. Pull
the augers out of the freezer barrel slowly. As the
augers are being pulled out, carefully remove each of
the plastic flights with springs.
H. Keep the rear of the auger shafts tipped up once they
are clear of the freezer barrels to avoid dropping rear
seals.
I. Wipe socket lubricant from the drive end (rear) of the
auger with a cloth or paper towel.
J. Remove the rear seals.
K. Remove all O-rings from parts by first wiping off the
lubricant using a clean paper towel. Then squeeze the
O-ring upward with a dry cloth (Fig. 21). When a loop
is formed, roll out of the O-ring groove.
Figure 21. Removing O-ring