Page 8
Due to continuous product research and development,
the information contained herein is subject to change without notice.
www.stoddart.com.au
www.stoddart.co.nz
Installation
2
2
3
3
4
4
1
1
1. Insert the two air deflector glass panels into the
channel, located behind the front vent
2. Insert two shelf arms into the vertical slots (ensure
shelf arms are postitioned at the same height)
3. Place the front and rear horizontal shelf bars onto the
shelf arms (ensure shelf bars lock into the shelf arms).
Run the LED power lead on the inside of the shelf arm
and connect to the nearest sockett
4. Install the glass panels
1. Insert the top into the top door INSERT and push UP
2. Swing the door IN and drop the door DOWN into the
door rail
3. Slide door across
4. Repeat for the second door.
Note:
Shelves are different sizes
Note:
When inserting, ensure the rollers on the door are at the bottom to place on the door rail. Ensure the first door is placed on the back rail
to allow the second door to be inserted
Installing the Shelves
Installing the Sliding Doors
Adjustable Shelves
Rear Sliding Doors
1
2
3