12
12 -2 Electrical Connections
Power requirement is 12 volts with a minimum continuous 15 amp supply for a gravity fed machine or 30amps
for an Air Force machine
The machine is supplied with a control console and all wiring
Ensure the power supply cable
(2)
is connected direct to the vehicle battery to ensure maximum power.
Connect the positive wire (fused) to the positive (+) terminal and negative earth connection to the negative (-)
terminal.
Control extension cables available (please enquire)
WARNING
Failure to connect to the vehicle battery may result in control function problems and possible dam-
age to the vehicle battery and charging system must be in good condition to achieve the best results.
All cables and controls are fitted with matching plugs and sockets.
WARNING any modification to the wiring, fuse holder or controls will invalidate any warranty claim
and may affect the performance of the machine.
Always replace any blown fuse with the same amp rated blade type fuse as the original one fitted.
12 -1 Electrical Components
Vari Speed machine components
1. GA115B
Control Panel
2. MM107B
5m Fused Power Cable
3. MM108B
6m Control Connector Cable
4. MM044B
Feed Motor
Air Force machine components
1. FJ110D
Control Panel
2. FJ107F
7m Fused Power Cable
3. FJ108D
6m Control Connector Cable
4. FJ109D
Tail Piece
5. FJ055A
Toggle Switch
6. TJ120
12v Fan Unit
7. MM044B
Feed Motor
1
2
5
4
6
7
3
1
2
3
4