10
10-1 Clearing a blockage
Disconnect the main power supply
Ensure the parent machine is stationary, switched off, and parked on level ground
Ensure the main power switch on the control panel is off and unplug the power supply cable or disconnecting
the power cable from the vehicle battery.
Ensure appropriate personal protection equipment is worn for the product being applied
Ensure any product removed is put back into its original container
Care to be taken not to spill any product that could contamination the environment.
Empty the hopper of any remaining product
10-2 Hopper removal
Removing the hopper for cleaning and maintenance
Ensure the hopper is completely empty and free from any product residue
Ensure appropriate personal
protection equipment is worn for the product being applied
Release the rubber lid retaining straps and remove the lid. The
hopper can then be lifted away after removing the retaining plate
(s) from within the hopper by releasing the M8 external fixing nuts
and washers.
NOTE
When replacing he hopper ensure the Gasket fitted under
the base of the hoper is in good order
Replace if damaged; part number FJ017S
10-3 Storage
Disconnect the power supply by unplugging the power cable or
removing the inline fuse from the power cable if storing the
machine for long periods.
It is the responsibility of the operator to ensure the hopper is empty after each and use and cleaned
thoroughly before storage.
Store in dry conditions to protect the machine and control system from moisture
Always clean and spray electrical connectors with a moisture repellent spray when not in use for long periods.
10-4 Optional PVC Waterproof Covers
Heavy duty White PVC covers fitted with eyelets and bungie cord for easy attachment available for all
machines. Available through your local dealer
To order a 65L Waterproof PVC Covers quote part number
LC65
To order a 130L Waterproof PVC Covers quote part number
LC130
10 - 5 Disposal
Ensure that any persons handling the machine are aware that the machine may have been used to
apply toxic chemicals and so the appropriate personal protection equipment should be worn.
Ensure the hopper contents have been removed and any toxic residue removed and put back into a sealed
contained or disposed of in accordance with the manufacturers guidelines to eliminate any possible
contamination of others or the environment
Always adhere to the local disposal regulations paying particular attention to the plastics, rubber,
and electrical components
.