11
11-1 Clearing a blockage
Switch off the main power switch on the instrument panel
Ensure the parent machine is stationary, switched off, and
parked on level ground
Ensure the main power switch on the control panel is off and
unplug the 2 core power supply cable from the control box or disconnecting the power cable from the vehicle
battery.
Ensure appropriate personal protection equipment is worn for the product being applied
Ensure any product removed is put back into its original container
Care to be taken not to spill any product that could contamination the environment.
Empty the hopper of any remaining product
11-2 Hopper removal
Removing the hopper for cleaning and maintenance
Ensure the hopper is completely empty and free from any product residue
Ensure appropriate personal
protection equipment is worn for the product being applied
Release the rubber lid retaining straps and remove the lid.
The hopper can then be lifted away after removing the
retaining plate(s) from within the hopper by releasing the
M8 external fixing nuts and washers.
NOTE
When replacing he hopper ensure the Gasket fitted
under the base of the hoper is in good order
Replace if damaged; part number FJ017S
11-3 Storage
Disconnect the power supply by unplugging the power cable
or removing the fuse in the power cable if storing the ma-
chine for long periods.
It is the responsibility of the operator to ensure the
hopper is empty after each and use and cleaned
thoroughly before storage.
Store in dry conditions to protect the machine and control
system from moisture
Always clean and spray electrical connectors with a moisture repellent spray when not in use for long
periods.
Ensure feed shutters are free to operate following periods of storage
11- 4 Optional PVC Waterproof Covers
Heavy duty White PVC cover fitted with eyelets and bungie cord for easy attachment
65L Waterproof PVC Cover
Part No. LC65
130L Waterproof PVC Cover
Part No. LC130
Available through your local Stocks AG dealer
11- 5 Disposal
Ensure that any persons handling the machine are aware that the machine may have been used to
apply toxic chemicals and so the appropriate personal protection equipment should be worn.
Ensure the hopper contents have been removed and any toxic residue removed and put back into a sealed
contained or disposed of in accordance with the manufacturers guidelines to eliminate any possible
contamination of others or the environment
Always adhere to the local disposal regulations paying
particular attention to the plastics, rubber, and electrical components
.
