Stober SC6 Series, Commissioning Instructions

Page: 92 / 99

11 | Appendix STOBER
92
05/2019 | ID 442793.01
11.1.8 ISPC 5 -STGCL-7,62
Feature Line type Value
Contact spacing — 7.62 mm
Nominal current at ϑ
amb
= 40 °C — CE/UL/CSA:
32 A/35 A/35 A
Max. conductor cross-section Flexible without end sleeve 6.0 mm²
Flexible with end sleeve without plastic collar 6.0 mm²
Flexible with end sleeve with plastic collar 4.0 mm²
2 conductors, flexible, with double end sleeve with
plastic collar 1.5 mm²
AWG according to UL/CSA 8
Min. conductor cross-section Flexible without end sleeve 0.2 mm²
Flexible with end sleeve without plastic collar 0.25 mm²
Flexible with end sleeve with plastic collar 0.25 mm²
2 conductors, flexible, with double end sleeve with
plastic collar 0.25 mm²
AWG according to UL/CSA 24
Insulation stripping length — 15 mm
Tightening torque — —
Tab. 106: ISPC 5 -STGCL-7,62 specification
11.1.9 ISPC 16 -ST-10,16
Feature Line type Value
Contact spacing — 10.16 mm
Nominal current at ϑ
amb
= 40 °C — CE/UL/CSA:
55 A/66 A/66 A
Max. conductor cross-section Flexible without end sleeve 16.0 mm²
Flexible with end sleeve without plastic collar 16.0 mm²
Flexible with end sleeve with plastic collar 10.0 mm²
2 conductors, flexible, with double end sleeve with
plastic collar 4.0 mm²
AWG according to UL/CSA 4
Min. conductor cross-section Flexible without end sleeve 0.75 mm²
Flexible with end sleeve without plastic collar 0.75 mm²
Flexible with end sleeve with plastic collar 0.75 mm²
2 conductors, flexible, with double end sleeve with
plastic collar 0.75 mm²
AWG according to UL/CSA 20
Insulation stripping length — 18 mm
Tightening torque — —
Tab. 107: SPC 16 -ST-10,16 specification