Installation
Commissioning Instructions Bottom brake resistor
11
ID 441806.03
WE KEEP THINGS MOVING
4
4
Installation
WARNING!
Danger of injury/death and property damage due to electric shock!
X
Before installing accessories, turn off all voltage supplies! Then wait 5 minutes for the DC link capacitors
to discharge. Never begin with accessory installation until after this!
Prerequisites:
•
You have bored the holes for threaded bolts (as per chapter 2 Technical data) in the switching cabinet
where the inverter is to be installed. The threaded bolts are included with the bottom brake resistor.
You will need the following for installation:
•
The threaded bolts included with the bottom brake resistor
•
The screws and washers included with the bottom brake resistor
•
A Phillips screwdriver
Installation of the bottom brake resistor
1
Secure the bottom brake resistor to the mounting panel of the switching
cabinet with the threaded bolts: