2 | General safety instructions
6
10/2019 | ID 443149_en.00
2
General safety instructions
There are risks associated with the product described in this documentation that can be prevented by complying with the
described warning and safety instructions as well as the included technical rules and regulations.
2.1
Intended use
The drives described in this documentation are intended for installation in industrial machines or systems.
The following are considered non-intended use:
§
Any overloading of the drives
§
Operation in ambient conditions that deviate from those described in the corresponding technical documentation
§
Modifying or refitting the drives
§
Using the drives for an application other than that defined during project configuration
Commissioning the machine in which the drives are installed is prohibited until it has been determined that the machine
corresponds to regional laws and guidelines. In particular, the (Machinery) Directive 2006/42/EC is to be observed in the
respective scope.
Operation of the drives in potentially explosive atmospheres is prohibited, unless they are expressly designed for this.
2.2
Requirements for personnel
All mechanical tasks that arise during the assembly, commissioning, maintenance and removal of the product may be
performed only by specialized personnel who hold a corresponding qualification in the field of metal technology.
All electrical tasks that arise during the assembly, commissioning, maintenance and removal of the product may be
performed only by electricians who hold a corresponding qualification in the field of electrical engineering.
Tasks that arise during transport, storage and disposal may be performed by personnel who have been instructed in the
suitable method for doing so.
Furthermore, personnel who handle the product must carefully read, understand and observe the valid regulations, legal
requirements and applicable basic rules as well as this documentation and the safety instructions it contains.
2.3
Prevention of personal injury
2.3.1
Mechanical hazards
WARNING!
Dangerous movements of machine parts!
Moving machine parts can cause serious injuries or even death!
ü
Before starting the motor or drive:
▪
Install all protective devices necessary for operation.
▪
Make sure that no one is standing in the danger area or able to enter it unchecked.
▪
Leave the danger area.
