Stober P Series, Operating Manual

Page: 23 / 34

5 | Installation
10/2019 | ID 443149_en.00
23
Type ME/MF MEL/MFL
KS s M
A
KS s M
A
[mm] [Nm] [mm] [Nm]
PHQ933 M10 8 75 M12 10 130
PHQ1032 M16 14 310 – – –
PHQ1033 M12 10 130 M16 14 310
PHQ1132 M16 14 310 – – –
PHQ1133 M12 10 130 M16 14 310
PHQ1232 M20 17 610 – – –
PHQ1233 M16 14 310 – – –
PHV933 M10 8 75 M12 10 130
PHV1033 M12 10 130 M16 14 310
Tightening torques for the locking screw (11) for PE planetary gear units
Type ME MEL
KS s M
A
KS s M
A
[mm] [Nm] [mm] [Nm]
PE211 M4 3 4,5 – – –
PE212 M4 3 4,5 – – –
PE311 M5 4 9,0 M6 5 16
PE312 M5 4 9,0 M6 5 16
PE411 M6 5 16 M8 6 40
PE412 M6 5 16 M8 6 40
PE511 M8 6 40 M10 8 75
PE512 M8 6 40 M10 8 75
Abbreviations used:
§ KS = Nominal diameter of the locking screw (11)
§
M
A
= Tightening torque for the locking screw (11)
§ s = Size of the hexagon insert (3)
5.2.4 Mounting the motor on a gear unit with MB adapter
The assembly of a motor on a gear unit with an MB motor adapter with brake is described in a separate document (see
Supporting documents [ } 5] ).
5.3 Mounting drive elements on a solid shaft
This chapter describes the assembly of drive elements, such as hubs, belt drives, couplings, pinions or sprockets, on the
output of a gear unit with a solid shaft and feather key.
When mounting drive elements on a solid shaft without a feather key, observe the technical documentation of the drive
element in question.