Stobag Universal US3910 Operating Instructions Manual Download Page 40

Page: 40 / 44

www.stobag.com

Operating instructions

VS5200 | VM720/3 | US3910

7 Disassembly and disposal

Improper disassembly

Risk of injury due to improper disassembly!
• Disassembly work may only be carried out by personnel au-

thorized and commissioned by the manufacturer�

Improper disassembly increases the risk of injury due to high,
bulky and heavy components�

Disposal

Danger to the environment due to improper disposal!
• Collect plastics, metals, cables, batteries, awning fabrics,

glass as well as electrical and electronic components
separately�

• Collect plastics, metals, cables, batteries, awning mate-

rials, glass and electrical and electronic components and
recycle them in accordance with local regulations�

• In case of doubt, obtain information from the local authori-

ties or special disposal companies�

Batteries

Environmental hazard due to improper disposal of batteries!
• Dispose of batteries only in accordance with national

regulations�

In case of doubt, obtain information from the local authorities
or special disposal companies�

Summary of Contents for Universal US3910













































Search results

Summary of Contents for Universal US3910

Reviews:

Related manuals for Universal US3910

Brands by name

Popular brands

Stobag Universal US3910, Operating Instructions Manual

Search results

Summary of Contents for Universal US3910

Reviews:

Related manuals for Universal US3910

Brands by name

Popular brands