STMicroelectronics STM32Cube, Quick Start Manual

Page: 32 / 46

FP-ATR-LORA1: Step by step setup
Select B-L072-LRWAN1 or STEVAL-STRKT01 project
•
Set LoRa keys at runtime, avoiding project rebuild; the keys are stored
in the board’s EEPROM for subsequent use.
•
To do this, use the following commands on serial interface:
•
!deviceeui-xxxxxxxxxxxxxxxx
to set Device EUI
•
!joineui-xxxxxxxxxxxxxxxx
to set Application EUI
•
!appkey-xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
to set Application Key
•
!ntwkkey-xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
to set Network Key (usually
same as Application Key).
•
After that, restart the board with command
!sysreset
32
IMPORTANT NOTE : All the above serial commands MUST be
called