Running the demonstration
UM1011
40/49
Doc ID 18064 Rev 1
Figure 56.
HDMI CEC submenu selected
Once you select the
HDMI CEC
submenu, if no CEC error is generated, the device is
configured as Tuner and the physical and logical addresses are displayed on the LCD as
shown in
Figure 57
. To enter the CEC menu, press the SEL push-button.
Figure 57.
HDMI CEC configuration submenu
The LCD screen is divided into two parts as shown in
Figure 58
:
●
a subscreen that shows the CEC receive information: receive status, sender address
●
a subscreen prompting you to select the follower address and the command to send
Figure 58.
CEC menu
After selecting the follower address, select the command to be sent to that address using
the LEFT, RIGHT and SEL push-buttons. After selecting the command, the CEC device
sends this command to the address and displays the status of transmission as shown in
Figure 59.
HDMI CEC
Return
HDMI CEC
CEC device is confi-
gured as Tuner
and initialized
correctly
Logical Addr:
0xxx
Physical Addr:
0xxxx
Press SEL button to
enter CEC menu
CEC device is confi-
enter CEC menu
Receive:
Send Status:
TV
Select Follower ADDR
