UM0891
Running the demonstration
Doc ID 16982 Rev 1
Figure 29.
Setting the alarm activation time
●
Alarm Show:
this item displays the current alarm time. The default alarm activation
time displayed after powering up is 00:00:00. The message shown in
is
displayed on the LCD when this submenu is selected.
Figure 30.
Alarm Show submenu
To exit the
Alarm Show
submenu press the SEL push-button. To exit the
Alarm
submenu,
select Return and press the SEL push-button.
Note:
In the
Alarm Adjust
and
Alarm Show
menus, if the time and date have not been
previously configured, the message shown in
is displayed on the LCD screen.
Figure 31.
Time and date not configured
2.7.3
Images Viewer submenu
The
Images Viewer
submenu is used to demonstrate the LCD control performance using
the embedded SPI interface. The application displays successively the images stored on the
MicroSD card.
