RM0082
Power and clock management
Doc ID 018672 Rev 1
823/844
Figure 110. Typical power consumption with DDR2 @ 333 MHz
Note:
Slow, Doze and Sleep mode values are obtained with USB ports in suspend mode and then
power off USB PLL (PLL3) (setting register USB2_PHY_CFG.PLL-pwdn to 1)
Figure 111. Typical power consumption with DDR2 @ 166 MHz and mobile DDR
Note:
Typical current and power values listed in this chapter are not guaranteed. These values are
dependent on many factors including the type of application running, use of internal
functional capability, external interface usage, case temperature and power supply voltages.
