MN7000000050
Page
5
Hardware Installation
General instructions for installing the card are provided below. Since
the design of system may vary, refer to your system’s reference manual
for further information, if needed.
Insert the Card into the ExpressCard slot of your system. Make sure it
is inserted all the way in for a solid connection.
Driver Installation
Important:
If your system doesn’t boot to Windows properly with our
card installed, check with your system’s manufacturer for the latest
system firmware update.
For Windows® 2000/XP/Server 2003 SP1/Vista
Note: Server 2003 Server Pack 1 or above is required to install the
1394a + USB 2.0 ExpressCard successfully.
Windows® 2000/XP/Server 2003 SP1/Vista will automatically detect
and install the correct driver for the 1394a + USB 2.0 ExpressCard.
