218 Trademark Dr
•
Buda
•
Texas
•
78610
Phone
800.757.2581
•
Fax
844.894.2652
•
8
(c) 2016 SpeedTech Lights, Inc.
Programming Flash Patterns
All STL LED products are equipped with a non-volatile memory which will recall the last
flash pattern when the light bar is turned on.
Set your flash pattern by pushing the Flash Pattern button on your Cigarette Lighter Plug
to cycle through the various patterns until you find the appropriate pattern.
If you are not using the Cigarette Lighter Plug you will follow the wiring diagram to
identify the Flash Pattern wire to manually run through and select the desired flash
pattern.
Maintenance
While STL's light bars are very durable, there are some things you need to keep in mind and
practice to preserve the longevity and function of your bar.
Never take any STL Light bars through a car wash, such as a pressure washer, automatic
car wash, brushes that will scratch your equipment or similar car washes or equipment
where chemicals, high pressure water, and materials may scratch or damage your
equipment.
Use Water (H
2
0) with a soft cloth to clean your light bar and lenses.
Yellowing of clear lenses may occur overtime. Lenses can be purchased by calling STL
Customer Service at 800-757-2581.
Parts List
Mounting Brackets
Warning LED Modules
Printed Circuit Board
Cable Harness
Cigarette Plug with Power and Flash Switches
Trouble Shooting
All Manufacture Defects are covered under the STL Warranty accordingly. Warranty is void with
disassembly or rewiring of STL Products or Improper Wiring or Installation. If you are unsure
how to trouble shoot your light bar for any reason or if the trouble shooting does not fix your
issue, call Customer Service immediately for assistance at 800-757-2581.
