Included:
(1x) FLEXIT Headlamp PRO, (1x) 18650 Lithium-ion, (1x) Micro-USB cable, (1x) Carry pouch
Model # 00387
1 Year warranty
Troutman, NC | 704-508-1031 | [email protected] | STKRconcepts.com
BATTERY INSTALLATION
1) Pull tab to open battery case 2) Place 1x 18650
Lithium-ion rechargeable battery into the battery terminal.
KILL SWITCH
Prevent headlamp from accidentally turning on during
transportation.
POWER ON: Open battery case and slide kill switch to the
LEFT position to provide power to the headlamp.
POWER OFF: Open battery case and slide kill switch to the
RIGHT position to turn power off to headlamp.
PATENT PENDING
CLEAN & CARE
Hand-wash Foam & Strap with mild soap.
Do not submerge in water. Not machine washable.
Strap
Comfort Fit
Foam
Open Tab
Battery
Micro-USB
port
Battery Level
Indicator
CHARGING
1) Plug the micro-USB cable into the micro-USB port 2)
plug the other end of the cable into a USB wall charger*,
USB car charger*, or any other USB charging device* (e.g.
computer). *Not included. *Charger output of 1A to 2.1A is
recommended. Charger output should NOT exceed 2.1A
to prevent battery damage.
- - Battery Level Indicator lights blink while charging then
solid glow when fully charged.
**Please recharge a stored unit every four months to
maintain optimum performance of the lithium-ion batteries
and maximize charging levels. Battery excl. from warranty.
Kill Switch
(shown in the POWER
ON position, slide to
the right to POWER
OFF)
+
_
